NDTSHOP.INFO

Accurately test flue gases in furnaces and domestic boilers to determine operation efficiency. Time/date documentation for future reference.
Measures CO, O2, pressure, and temperature
Calculates CO2 and gross or net efficiency
Works on High Efficiency furnace
Select between 4 fuels (Natural Gas, LPG, Light Oil,Heavy Oil)
Pump driven for fast response
Dual input differential manometer with 3 selectable units of measure: kPa, mBar, inH2O
Flue probe with built-in thermocouple
IR printer port - use optional A740 Infrared Printer
Soft carrying case
Protective rubber boot
Applications:
RESIDENTIAL
Furnace
Hot water heater
Radiant heat boilers
CO testing
COMMERCIAL
Boilers
Furnaces
Hot water heater
CO testing
INDUSTRIAL
Boilers
Furnaces
Hot water heater
CO and high CO testing

Measure and Memory:
CO
Range: 0-10,000ppm
Resolution: 1ppm
Accuracy: ±5ppm or 5%, whichever is greater
O2
Range: 0-25%
Resolution: 0.1%
Accuracy: ±0.3%
CO2
Range: 0-25%
Resolution: 0.001
Accuracy: Calculated
Excess Air (Calculated)
Efficiency (Calculated)
Leak (Level)
Pressure (Difference)
Temperature (2-Channel): -100° - 1,000°C
Difference (Ch1-Ch2 Calculated)
Single Memory Store: 10
Data Logger 100 Steps x 4 Page
Recall Function
Real Time Display
Backlight
IR Print Port
Store Mode Print
Real Mode Print
IRDA
Specifications:
Operating Temperature Range: -10° to 50°C (14° to 122°F)
Battery: 4AA Alkaline Batteries
Fuels: Natural Gas, LPG, Light Oil, Heavy Oil
Display: Backlit LCD T
ime & Date: 24 Hour Real-Time Clock
Dimensions: 200mm x 90mm x 60mm
Weight: 500g
Switch Off: Failsafe
Exhaust: Safety Spigot
Conforms To: BS7927 (and the draft BS7967)

Included with all models:
Carrying Case
Flue Probe
Protective Boot
Manual

Features:

This rechargeable refrigerant Gas detector responds to all halogenated refrigerants.
Detects Ethylene Oxide GAS Leak in hospital equipment
Detects refrigerant Leaks in air condition refrigeration and storage/recover containers.
Detect Halon Gases in fire extinguishing systems.

Specifications:
Detect item: All halogenated refrigerant gases
Sensitivity: SAEJ1627standard - Less than 0.5oz/yr, for all halogen based refrigerants
Response time: instantaneous
Continuous operation: 5 hours (varies slightly with operations)
Low battery: 5.5 +/-0.3V
Operation Temperature: 0-52°C
Power Supply: 4.8v (Nicd Rechargeable Batteries)
Weight: 620g

More  Info……

• Features Packaged to provide electrical testing needs of HVAV, large appliances and electrical systems
• IR Thermometer provides non-contact measurement of surface temperatures
• Kit contains:
  • RDI-821D autoranging digital multimeter,
  • RDI-DC801 600A Clamp meter,
  • RDI-AR802A IR Thermometer,
  • RDI-VD801 non-contact Voltage Detector,
  • test leads and type k temperature probe
• Supplied in hard carry case that provides protection and organization of your meters.

Professional heating device especially designed for pre-heating small bearings prior to mounting

* Thermostat controlled
* Adjustable temperature range of 50 - 200 °C (120 - 390 °F)
* Protective cover to avoid contamination during heating

Download User’s Manual

Technical data

* Designation:
o 729659 C/110V - 115VAC (50/60Hz)
* Power: 1,000 W
* Temperature range: 50°-200°C (120°-390°F)
* Plate dimensions (l x w): 380 x 178 mm (15 x 7 in)
* Height of cover: 50 mm (2 in)
* Overall dimensions (l x w x d): 400 x 240 x 130 mm (16 x 10 x 5 in)
* Weight: 4.7 kg (10 lb)
* Length of connection cable: 2 metres (6.6 ft) (earth connection required)

SKF-729659 C/110V

for more info

1kHz Professional Calibrator for 0.5″ or 1.0″ Microphones

* Calibrates and verifies Sound Level Meter operation
* Battery test position with battery status LED indicates if battery is good
* For use on Sound Level Meters with 0.5″ or 1.0″ microphones
* Durable die-cast, aluminum housing 1kHz sine wave at 94dB/114dB is generated to an accuracy of 5% (frequency) and ±0.8dB

more info